Well-Known PE600*900 jaw crusher

1) the best machine for crushing stone, 2) Simple structure and easy to operate , 3)various models to different require.  Name:Jaw CrusherAdvantages:1,large crushing ratio, uniform particle size. 2, easy to replace parts, maintenance, small amount of work. 3, simple structure, reliable operation and low cost . 4, low noise, less dust. 5, nesting population adjustment range, can meet different user requirements;

Product Description:PE Jaw Crusher is our company set the successful experience in similar products at home and abroad, for mining, smelting, building material, highway, railway, water conservancy, road construction and other industrial sectors quarries and rock crusher specially designed. The product specification is complete, the feed size from 80-850 mm, PE-type jaw crusher crushing materials of compressive strength of up to 300Mpa, is a complete set of broken lines in the first choice of primary crushing equipment.

Jaw Crusher Working Principle:

This series of crusher works for the song dynamic compression type, its working principle is: Motor-driven belt and pulley, through the eccentric shaft so that the jaw moving up and down movement, when the moving jaw rises, the elbow angle between the plate and moving jaw larger, and thus promote the move to the fixed jaw plate close to the jaw plate, rather than at the same time material has been crushed, or split pieces to achieve the purpose of crushing; When moving the jaw down when the angle between toggle plate and moving jaw smaller, fixed jaw plate rod, spring roles, left the fixed jaw plate, this time has been broken under the mouth of materials discharged from the crushing chamber. With the motor continuously rotating motor broken jaw for periodic motion of crushing and waste material, to achieve mass production.Jaw Crusher Note:

The aircraft should be checked before use each part of fasteners, particularly bolts lubricated parts and ministries, all lubricated parts need to maintain sufficient oil, will be fastening bolts loose, and then clean up broken cavity residue, and then start production of in normal work, note that even under the material may not be under a foot, for a long time without adding, too much can cause mechanical blockage. Jaw movement and static jaw plates, side panels, roof of wearing parts, taking care to maintain!

Main Technical Parameter:

Model	Size of feed openning(mm)	Max feed size(mm)	capacity (m3/h)	Motor power(kw)	Distrarge range openning(mm)	Eccentric shaft speed (r/min)	weight(t)
PEX100×600	100×600	80	2-8	7.5	7-21	330	1
PEX150×750	150×750	120	5-16	15	18-48	320	3.5
PEX250×750	250×750	210	8-22	22	25-60	330	4.9
PEX250×1000	250×1000	210	10-32	30	25-60	330	6.5
PEX250×1200	250×1200	210	13-42	37	25-60	330	7.7
PEX350×700	350×700	300	16-35	30	30-80	300	6.5
PEX300×1300	300×1300	250	15-55	75	30-80	300	11
PE150×250	150×250	125	0.6-3	5.5	10-40	300	1
PE250×400	250×400	210	3-13	15	20-60	300	2.8
PE400×600	400×600	340	10-34	30	40-100	275	6.5
PE500×750	500×750	425	20-52	55	50-100	275	10.5
PE600×900	600×900	500	30-75	55	65-160	250	15.5
PE750×1060	750×1060	630	72-130	110	80-160	250	28
PE870×1060	870×1060	670	160-210	110	200-260	250	30.5
PE900×1060	900×1060	685	170-250	110	230-290	250	31
PE900×1200	900×1200	750	90-190	132	95-180	200	50
PE1000×1200	1000×1200	850	197-214	132	230-265	200	51
PE1200×1500	1200×1500	950	188-500	160	150-350	180	100.9

Well-Known PE600*900 jaw crusher